Colorbond Fencing
Supply and install Colorbond fencing for boundaries, side returns and backyards across Perth, in a range of colours and heights. Call Perth Fencing Experts today!
Learn More →
Gate Installation in Perth, WA
Pedestrian, side, double driveway and sliding gates built to match your fence, with quality hinges and latches. Call Perth Fencing Experts today!
Request a Free Quote
Gate Installation in Perth: Side Gates, Driveway Gates and Pool Gates Built for Sandy Soil and Summer Heat
A gate gets more use than any other part of your fence. It swings open for the bins every week, gets pushed by kids and dogs, and takes a hammering from the afternoon sea breeze. Our gate installation work covers single pedestrian side gates, double swing driveway gates and sliding gates on a ground track. We build them to match your fence, whether that's steel sheeting, aluminium slats or timber palings. If you're replacing the fence at the same time, we can build the gate into a new Colorbond fence so the panels, posts and capping line up properly.
Most gate problems in Perth start in the ground. Much of the metro area sits on loose coastal sand that won't grip a post on its own, so we set gate posts in concrete footings sized for the gate's weight and swing. In some coastal suburbs we hit limestone just below the surface and have to core or break through it to get proper depth. In the hills and parts of the Swan Valley, clay soil swells in winter rain and shrinks in summer, which can twist a poorly set post out of line. We dig and pour for the conditions on your block, not to a one-size template.
The weather in Perth metro area is hard on hardware. Long, hot summers and strong UV dry out timber and break down cheap nylon fittings. Salt air near the coast eats into plain steel hinges and latches within a few seasons. That's why we choose galvanised or stainless hardware for coastal jobs and add bracing to timber gates so they don't sag as the wood dries. If your gate already drags on the ground or won't latch, our fence repairs team can often rehang it or replace the hardware without a full rebuild.
- Single pedestrian side gates for bin and garden access
- Double swing driveway gates with drop bolts and gate stops
- Sliding driveway gates on ground track with wheel kits
- Pool gates with self-closing hinges and self-latching hardware
- Colorbond, aluminium slat and timber gates matched to your existing fence
- Concrete-set steel gate posts sized for sandy and limestone ground
- Galvanised and stainless hinges and latches for coastal salt air
- Keyed and lockable latches for side access security
How We Install Gates on Perth Properties
From checking the soil to testing the latch, here's what happens on site.
Step 1: Measuring the Opening and Checking the Ground
We measure the gap between posts, check the fall of the ground across the opening and note anything the gate needs to clear, like a raised path or garden edge. We also probe the soil to see if we're dealing with loose sand, limestone or clay. That tells us how deep and wide the post footings need to be.
Step 2: Setting Gate Posts in Concrete Footings
We dig the post holes, break through limestone if we hit it, then stand the steel or timber gate posts and brace them plumb. Concrete goes in and the posts are left to set before any weight is hung on them. Rushing this step is the main reason gates sag later.
Step 3: Building and Hanging the Gate
We assemble the gate frame, add infill to match your fence and brace it diagonally where the material needs it. Then we hang it on hinges and adjust it so it swings or slides freely with even gaps on each side. For sliding gates, we lay and level the track and fit the wheel kit and guide rollers.
Step 4: Fitting Latches, Locks and Final Adjustments
We fit the latch, drop bolts, gate stops or lock you've chosen and test it repeatedly. Pool gates are checked to make sure they swing shut and latch on their own from any open position. We clean up offcuts and concrete spoil before we leave.
What a Properly Hung Gate Does for Your Home
Easier access, better security and hardware that lasts in local conditions.
A Gate That Opens Easily Every Time
Posts set properly in the ground and a well-braced frame mean the gate doesn't drop and drag on the path. You can wheel the bins out with one hand instead of lifting and shoving. The latch lines up and catches without you having to slam it.
Better Security for Side and Rear Access
A solid gate with a keyed latch closes off the easy path into your backyard and shed. Driveway gates keep cars, trailers and tools out of sight from the street. It also keeps dogs and young kids inside where they belong.
Hardware That Holds Up to Salt and Sun
Choosing the right hinges and latches for your area means less rust staining, less seizing and fewer replacement parts. Coastal homes avoid the orange streaks that run down from cheap fittings. You spend less time oiling, adjusting and fixing.
Why Perth Homeowners Trust Us With Their Gate Installation
We Know What's Under Perth Yards
We've dug through sand, limestone caprock and hills clay across the metro area. We size footings for what we find, not a standard hole depth. That's what keeps your gate hanging straight years from now.
Gates That Match Your Fence
We build fences as well as gates, so we can match Colorbond profiles and colours, aluminium slat spacing or timber paling styles. Your new gate looks like it was always part of the fence. No odd mismatched panel at the side of the house.
Hardware Chosen for Your Suburb
A beachside home in the western suburbs needs different fittings to a block in the eastern hills. We pick hinges, latches and fixings for salt exposure, UV and how often the gate gets used. You won't be replacing rusted parts after a couple of summers.
Fencing, Gates and Repairs From One Crew
We're based in Canning Vale and handle new fences, pool barriers, gates and repairs. If a fence panel or post nearby needs work while we're on site, we can sort it in the same visit. One call covers the whole boundary.
Gate Installation Questions From Perth Homeowners
Common questions answered
Why does my side gate keep sagging and dragging on the ground?
Usually the hinge post has moved in loose sand, or a timber gate has dried out and dropped at the latch end. We fix it by resetting the post in a proper concrete footing and adding a diagonal brace or adjustable hinges. Sometimes a rehang is enough, and sometimes the post needs replacing.
Should I get a swing gate or a sliding gate for my driveway?
Swing gates need clear space to open, which can be a problem on sloping driveways or short setbacks. Sliding gates need enough straight fence line beside the opening for the gate to run along. We look at your slope, space and how you use the driveway before recommending one.
What affects the cost of a new gate?
The main factors are the width of the opening, whether it's a single or double gate, the material, and the hardware you choose. Ground conditions matter too, since limestone or clay can mean extra work to set posts. We'll give you a written quote after seeing the site.
Can you install a pool gate that meets WA safety rules?
Yes. Pool gates need to swing outward away from the pool, close on their own and latch automatically, with the latch at the required height. We install self-closing hinges and self-latching hardware to suit, and we can also build the full pool fencing around it.
How do I look after my gate in Perth's weather?
Check hinges and latches every few months, especially before summer and after winter rain. Spray moving parts with a light lubricant, tighten loose screws, and hose salt spray off metal gates if you live near the coast. Timber gates benefit from a fresh coat of oil or stain when the surface starts to look grey and dry.